Extractors

Sort By:  Post Date TitlePublish Date
Andy Standing  |  Aug 02, 2007  |  0 comments
Woodworking is an activity that does generate a lot of mess. If you mainly use hand tools, the shavings and sawdust tend to build up at a fairly manageable rate, and a quick sweep up at the end of the day can keep the workshop tidy. However once you begin using machinery, you suddenly become capable of generating a large quantities of chippings and sawdust that will quickly overwhelm the workshop. This is the time when you realise that you will…

Keith Smith  |  Jul 25, 2007  |  0 comments
There are two basic types of extractor, the coarse dust or chip extractor and the fine filter extractor;

1. The chip extractor has a centrifugal fan which draws a large volume of air along the inlet pipe, past the fan blades and into a collection bag. This produces a high volume, low pressure airflow and its performance rapidly reduces if used with pipes or ducting smaller than 100mm. Also the filter has to be relatively coarse or it will…

Keith Smith  |  Jul 25, 2007  |  0 comments
Protecting yourself against the hidden dangers of dust is a must. Keith Smith, The Woodsmith, unravels the myths and facts of dust extraction. Modern woodworking techniques involve the use of powered machinery and tools which create large amounts of chips and dust. Efficient extraction ensures that not only do you protect your health, but your machinery works more efficiently, and the workshop is a better and safer environment to work in.…

X