Videos

Sort By:  Post Date TitlePublish Date
Get Woodworkng Staff  |  Dec 17, 2015  |  0 comments
This beautiful reinvention of the standard sideboard looks beyond the conventional cabinet design. Sebastian Errazuriz created the Wave Cabinet, inspired by waveforms and made out of around 100 Baltic birch slats interconnected by a series of individual hinges, move one and the others follow in a wonderful cascade as the cabinet opens.
Matthew Smith  |  Sep 23, 2011  |  0 comments
In this video series, Les Thorne takes you through the simple steps in creating this bowl turned from ash.
Matthew Smith  |  Sep 22, 2011  |  0 comments
Les creates a chucking point and shapes the outside of the bowl using pull and push cuts before cleaning up the finish.
Matthew Smith  |  Sep 21, 2011  |  0 comments
Les works the finish with an arbitech saw before lightly burning the surface and sanding off.
Priti Goodall  |  Sep 20, 2011  |  0 comments
Les turns the inside of the bowl and then uses the arbitech saw and blowtorch to add the same finish as the outside of the bowl before spraying the finish with a lacquer.
Priti Goodall  |  Sep 19, 2011  |  0 comments
Les sands down the rough edges before staining the bowl with some coloured spirits.
The Woodworker  |  Sep 17, 2011  |  0 comments
The final episode sees Les demonstrate several techniques on how to turn the centre of the bowl before fielding a few Q&As from the audience.
Ben Plewes  |  Apr 15, 2011  |  0 comments
In this video series, Peter Dunsmore takes you through the simple steps in creating stunning veneered surfaces and basic inlay.
Mansoor Iqbal  |  Apr 13, 2011  |  0 comments
Peter takes us through the process of cutting the veneer to the right size.
Mansoor Iqbal  |  Apr 12, 2011  |  0 comments
Peter demonstrates how to use a press to ensure your veneer remains flat.
Mansoor Iqbal  |  Apr 11, 2011  |  0 comments
Peter trims the edges of the veneer before adding the lipping and crossbanding.
Matthew Smith  |  Apr 10, 2011  |  0 comments
Peter demonstrates how to enhance your furniture's veneer by making his own inlay with a piece of cherry and burr.
Matthew Smith  |  Apr 09, 2011  |  0 comments
In the final video of this series Peter demonstrates the techniques used to finish the inlay and shows us examples of how to use veneer to give the best effect.
Ben Plewes  |  Mar 28, 2011  |  0 comments
In this first instalment Peter Dunsmore demonstrates a special jig for cutting mitre keys before proceeding to build it from offcuts found around the workshop.
Ben Plewes  |  Mar 27, 2011  |  0 comments
In this episode Peter demonstates his particular method of cutting mitres for the corner joints of the box.

Pages

X