Win either 1st prize of a Trend T14 router & WRT router table or 2nd prize of a T12 router
PLEASE NOTE THIS COMPETITION IS NOW CLOSED – THE WINNERS WILL BE ANNOUNCED & NOTIFIED SHORTLY
To celebrate the launch of the new T12 and T14 routers, Trend is giving two lucky readers the chance to win either first prize of a T14 workshop router & WRT router table (worth £1,200), or second prize of a T12 plunge router (worth £557) – good luck!
T14 2,300W 1⁄2in workshop router
High-performance plunge router with advanced safety features, engineered to deliver reliable, fast and accurate cuts. Perfect for hand-held and router table use
• 80mm plunge depth & automatic power shut-off
• Router table safety switch replaces the need for a typical NVR switch
• 2-in-1 plunge & router table height adjuster
SPECIFICATION
Voltage: 240V
Plunge stroke: 0-80mm
Power input: 2,300W
Standard collet diameter: 1/2in
No load speed: 9,000-22,000rpm
Dust spout size ID: 35mm
Guide bush diameter supplied: 30mm
Cutter diameter max – table mounted: 85mm
Cutter diameter max – hand-held: 50mm
Base aperture: 75mm
Rod diameter: 10mm
Rod length: 360mm
Rod centres: 110mm
Weight: 6.5kg
T12 2,300W 1⁄2in plunge router
High-performance trade-focused plunge router with advanced safety features, engineered to deliver reliable, fast and accurate cuts
• Seven-level variable speed control & auto-lock plunge lever
• Top-mount cyclone extraction & ergonomic inclined handles
SPECIFICATION
Voltage: 240V
Plunge stroke: 0-80mm
Power input: 2,300W
Standard collet diameter: 1/2in
No load speed: 9,000-22,000rpm
Dust spout size ID: 35mm
Guide bush diameter supplied: 30mm
Cutter diameter max (hand-held): 50mm
Base aperture size: 70mm
Rod diameter: 10mm
Rod length: 360mm
Rod centres: 100mm
Weight: 6.4kg
WRT 240V floor-standing workshop router table
• Packed with necessary features to maximise the versatility of all popular portable routers
• Phenolic surface: ultra-durable, stable and flat surface for friction-free stock feeding
• Quick-release aluminium extrusion back fence with sliding MDF cheeks
• Removable 6.35mm-thick aluminium insert plate with 98mm diameter aperture, pre-drilled for Trend T11 and T14 routers
• Quick raiser and quick release facility for Trend T11 and T14 routers
• High back fence with fully adjustable guard assembly
• Fully adjustable side finger pressure
• Front and side adjustable feather pressure guards
• Steel leg frame assembly with adjustable feet
• Six insert rings to reduce table aperture
• Lead on pin for bearing-guided curved work
• Edge planing facility on back fence of 1.4mm and 2.4mm
• Cable management clips
• NVR switch
• Mitre fence with zeroing and spelch block facility
For further information on Trend products and machinery, click here.
To be in with a chance of winning either 1st prize of a T14 2,300W 1⁄2in workshop router with WRT 240V workshop router table, or 2nd prize of a T12 2,300W 1⁄2in plunge router, you must complete parts 1 & 2 of the entry requirements. Part 1 – answer the multiple choice question below; Part 2 – visit the forum thread here and leave your response.
If you're not already a member of our forum, see the top right-hand of the page and click the 'sign up' button – follow instructions from here
Please note that the deadline for this competition is 20 May 2022