Phil Edwards has put together this short video to demonstrate how to adjust and fine tune blades in hand made planes. This is the first in a series of video's from Phil, so watch this space for the next installment.
I made my try plane from bubinga (also called African rosewood), although any durable hardwood will fi t the bill. I could only source 50mm thick planks, so I had to laminate stock together to get thick enough material. You will need a piece 600 x 75 x 62mm for the centre block, as well as two cheeks measuring 600 x 75 x 8mm. Rip the timber down to size on the bandsaw, then glue up the pieces to form the centre block.