Ken Stratford

Ken Stratford  |  Aug 22, 2009  |  0 comments
As with all my stands, I kept the construction of this saw station very simple and robust. It moves around every day on 4in castors and works very well.

The top and bottom are 675x535x18mm plywood with an 18x6mm rebate routed all around and 18x6mm groove routed centrally across the width. The ends should be cut to 535x286mm, again with an 18x6mm rebate in both ends to take the sides. Fix together with PVA glue in the base, adding the ends to…