LATEST STORIES

Jigs & Workshop Aids
Surface planing with a thicknesser
Ben Plewes  |  Aug 21, 2007  |  0 comments
If your workshop is anything like mine, the addition of this surface thicknessing jig will be a welcome one. It does exactly what it says on the tin, insofar as it allows you to surface a wide board using a thicknesser. The problem I encountered in my basement sized workshop was that I had enough room for a small six inch surface planer (on wheels) and a ‘portable’ thicknesser (also on a wheeled cabinet). The thicknesser can plane timber…

Continue Reading »
Workshop
Garage door upgrade
Keith Smith  |  Aug 02, 2007  |  0 comments
...After Before and... My workshop used to be a stable block and I thought that trying to insulate the whole area effectively would be an impossible task. So I just insulated and heated one of the 11ft square loose boxes and tried to work on smaller projects in the winter. This year I had some larger commissions and needed to work through the cold weather. I then had a little accident. I was planing the edge square on some…

Continue Reading »
Extractors
A quick guide to dust extraction
Andy Standing  |  Aug 02, 2007  |  0 comments
Woodworking is an activity that does generate a lot of mess. If you mainly use hand tools, the shavings and sawdust tend to build up at a fairly manageable rate, and a quick sweep up at the end of the day can keep the workshop tidy. However once you begin using machinery, you suddenly become capable of generating a large quantities of chippings and sawdust that will quickly overwhelm the workshop. This is the time when you realise that you will…

Continue Reading »
Extractors
Types of dust extractor
Keith Smith  |  Jul 25, 2007  |  0 comments
There are two basic types of extractor, the coarse dust or chip extractor and the fine filter extractor;

1. The chip extractor has a centrifugal fan which draws a large volume of air along the inlet pipe, past the fan blades and into a collection bag. This produces a high volume, low pressure airflow and its performance rapidly reduces if used with pipes or ducting smaller than 100mm. Also the filter has to be relatively coarse or it will…

Continue Reading »
Extractors
Understanding dust extractors
Keith Smith  |  Jul 25, 2007  |  0 comments
Protecting yourself against the hidden dangers of dust is a must. Keith Smith, The Woodsmith, unravels the myths and facts of dust extraction. Modern woodworking techniques involve the use of powered machinery and tools which create large amounts of chips and dust. Efficient extraction ensures that not only do you protect your health, but your machinery works more efficiently, and the workshop is a better and safer environment to work in.…

Continue Reading »
Power Tools
18V Combi Drills
Andy Standing  |  Jul 25, 2007  |  0 comments
Saftey Cordless drills are generally fairly safe tools. Assuming that you can avoid drilling holes in yourself, the main hazards are encountered when drilling into walls.

• Always make sure that you will not hit a mains cable, water pipe or similar obstruction. If in doubt, don’t drill. Use an electronic detector to verify the position of any hazard.

Continue Reading »
Hand Tools
Six of the best F-Clamps
The Woodworker  |  Jul 04, 2007  |  0 comments
1. Bessey K-Body Price: from £30 Toolbank 0800 068 6238 www.toolbank.com The king of clamps. Immensely strong mechanism. Jaws remain parallel even under heavy pressure. Hardened steel rollers and superpolyamide jaws. Wooden handle with ideally pitched thread. As strong as a sash clamp but much faster. Available in sizes from 300mm to 2500mm with 85mm throat depth. 2. Screwfix Speed Clamp Price: £8.89 Screwfix…

Continue Reading »

Pages

X